Boom delta wing

Paris, France – Denver-based Boom Supersonic is strengthening its strategic partnership with Rescale to leverage the power of cloud high-performance computing (HPC) for design and optimization of its new supersonic passenger jet.

The world’s first commercial supersonic aircraft, Concorde, was envisioned in the 1960s for next-generation, high-speed intercontinental travel. It was designed with a short wingspan to reduce supersonic drag, but with a long swept delta to produce lift-inducing vortices at landing and takeoff speeds. While a technical marvel, the plane wasn’t commercially successful due to high operating costs and the inability to fill 100 seats at the $20,000 round-trip ticket price. It was retired in 2003 after Airbus could no longer source parts, a rare backwards step in technology progress.

After fourteen years, Boom is reigniting the dream of supersonic travel and showing off its updated XB-1 supersonic demonstrator  at the Paris Air Show. The design phase this time looks very different from the 1960s. Leveraging Rescale’s turnkey cloud HPC platform, Boom uses computational fluid dynamics (CFD) and finite element analysis running on a massively-powerful compute infrastructure to run thousands of simulations at each stage of the design. This on-demand, zero-IT footprint has enabled them to run a lean startup operation, while at the same time simulating and optimizing high-fidelity virtual prototype models on the world’s most powerful compute clusters. Continue reading

This article was written by Rescale.

A3 Vahana image

Paris, France — Rescale is pleased to announce and its project Vahana as a groundbreaking new customer. Project Vahana is turning the dream of personal air transportation into an exciting reality. Vahana makes a bold proposal to extend the freedom of flight to everyone—not just those with pilot’s licenses—by introducing an autonomous, pilotless aircraft.

During the design phase of this vertical takeoff and landing (VTOL) aircraft, has a huge design space to explore. Designers are looking for sci-fi inspired shapes, structural engineers are concerned with weight, and aerodynamicists want sleek, high-performance flight surfaces.  By facilitating on-demand simulation software and fast, scalable big compute resources, Rescale has enabled to create a huge number of virtual prototypes to cover the design space and please all stakeholders. has been able to run thousands of simulations to achieve the optimal design, all achieved with a minimal in-house IT footprint.

Continue reading

This article was written by Rescale.

Guest post by Seth Morris, Aerodynamicist, Richard Childress Racing

In the world of stock-car racing, finding even the smallest competitive advantage is the difference between winning and losing.

That’s why at Richard Childress Racing, we design and build our race cars end-to-end. We engineer and machine our own chassis and suspension components, we design and fabricate our own bodies, and we test and build our own engines. Everything is built from the ground up at RCR.

Cup Shop Floor 2014

Perhaps that’s why we’ve been so successful over our 48 year history – dating back to 1969 when our owner, Richard Childress, got his start in NASCAR. Since then, we’ve won 17 championships and 200 races and became the first team to win in all three of NASCAR’s top touring series. Richard’s partnership with the legendary Dale Earnhardt made RCR an elite organization with six Cup Series championships stretching from 1986 to 1994.

Today, RCR has eight full-time race teams, 500-plus employees, a 40-acre campus with an engineering staff of over 50, ranging from mechanical design, aerodynamics, simulation, strategy, and research and development. Our aerodynamics team is six engineers strong with another four fabricators tasked with crafting the components for testing in the wind tunnel. Three of these six engineers are dedicated to simulating the aerodynamics of the car using computational fluid dynamics (CFD).

Continue reading

This article was written by Rescale.

本稿は、株式会社サーバーワークスの白鳥様による寄稿です。

白鳥 貴久(しらとり たかひさ)
サーバーワークス クラウドインテグレーション部 技術1課
流体工学の分野で博士(工学)の学位を取得後、2015年4月にサーバーワークスに入社。ネットリサーチ企業のログ分析基盤、国立研究開発法人の画像解析基盤、複合機メーカーのCAE基盤などの構築を担当。

データ転送時のセキュリティと転送効率の向上を実現する”HPC Gateway for ScaleX”

クラウドの計算能力とセキュリティが向上したことにより、製造業や研究機関のお客様がクラウド上で大規模シミュレーションを行う事例が増えてきました。

Continue reading

This article was written by Rescale Japan.